Extron 5 C-Arm Premium C, Standard Platform
The Extron C-Arm is a premium imaging system with Flat Detector Technology that offers low-dose radiation with flawless images and unchallenged noise reduction.
Extron 5 C-Arm Premium C, Standard Platform
Extron 5 C-Arm
The Extron C-Arm is a premium imaging system with Flat Detector Technology that offers low-dose radiation with flawless images and unchallenged noise reduction. The Extron provides 30% more Real-time Noise Reduction through advanced technology, providing surgical teams an environment conducive to critical tasks. With an impressive 30 x 30cm flat detector, the mobile C-Arm by Extron offers lag-free, clear pictures for diagnostic imaging.
Premium imaging platform TRUDIGITAL Architecture provides flawless low dose imaging to meet the high imaging standards of any challenging surgical procedures.
TRUDIGITAL powered by DRTECH’s premium grade EXPEED surgical detector and state-of-the-art image processing technology provides faster and more accurate data processing resulting in superior image resolution and low-noise dynamic imaging performance.
FEATURES
- 43” 4K Monitor (700cd/m2)
- Green laser guide in horizontal and vertical direction
- Wired 2-button Foot Switch
- Hand Switch
- Air Kerma Device
- Virtual Collimator
- 31.5” 4K Medical Monitor (800cd/m2)
- D.A.P (Dose Area Product)
Product Specs
System Power Requirements
- Line Voltage/Input Power: 120-127 VAC 50/60Hz, 20A(Momentary),5A(Stand-by)
220-230 VAC 50/60Hz, -16A(Momentary), 3A(Stand-by)
C-arm
-
- SID: 1,010mm
- Orbital Rotation: 165 ̊ (+120 ̊/-45 ̊)
- Horizontal Movement: 200mm
- Vertical Movement: 500mm
- Panning Movement: ± 12.5 ̊
- Pivot Rotation (C-arm rotation): ± 235 ̊
- Reverse Position: Yes
X-ray Generator
- Type: 15 kW High frequency Generator
- Input line voltage: 220 – 230 VAC single phase
- Input line frequency: 50/60 Hz
- Inverting frequency: 40kHz
- Fluoroscopy Mode: Continuous
- kV Range: 40 – 120kV
- mA Range: 0.2 – 10mA, 20mA, 30mA
- Frame Rate: Continuous – Max. 30 frames
- Snapshot:
- kV Range: 40 -120kV
- mA Range: 6mA (fixed)
- Pulsed Mode:
- kV Range: 40 – 120kV
- mA Range: 0.5 – 10mA
- Pulse Rate: Rate: 1, 2, 4, 8, 15, 30 pulses/sec.
- Boost:
- kV Range: 40 – 120kV
- mA Range: Boost – 20: 20mA (fixed) Boost – 40: 40mA (fixed)
- Pulse Rate: Rate: 15 pulses/sec
- ABC (Auto Brightness Control):
- kV Range: 40 – 120kV
- mA Range: 0.2 – 6.0mA
- X-ray Tube Monoblock: Rotating anode
- Target angle: 10
- X-ray tube voltage: 40 – 120kV
- Focal spot: 0.3 / 0.6mm (IEC 60336 Ed.4)
- Anode speed: 50Hz: 3,000 rpm 60Hz: 3,600 rpm
- Radiation protection: Leakage Technique Factor : 120kV, 3mA
- Cooling method: Natural or forced air
- Anode heat contents: 225kJ (300kHU)
- Maximum anode heat dissipation: 750W
- Available thermal capacity (RX): 600kJ
- Total thermal capacity: 910kJ
- Weight: 21.5kg
- Minimum inherent filtration: 1.4mm Al @ 75kV
- Dose Area Product (DAP Option):
- Product: VacuDAP-C
- Standard Calibration Response: 960pC/ uGy m2
- Leakage Current: ≤ 0.1pA
- Quality Equivalent Filtration: 0.3 mm Al(@70KV)
- Active Area: 1 Ø (8 … 70) mm
- Chamber voltage: 300 V
- Dose Area Product: 0.01 uGy/m2
- Dose Area Product Rate: 0.01 uGy/m2
- Irradiation time: 0.001s
- Ionization Chamber Weight: 55g
- Electronics Weight: 135g
Warranty
All Extron systems include 12 months of complete coverage.
We also offer full service agreements for 3 and 5 years, available at a discounted rate when included with the equipment purchase.